Square self service car wash

Square self service car wash

Includes 3 wash programs: Soap (powder) with high pressure and hot water, rinse, and final gloss with RO water and hot wax or cold.




  • Technical room dimensions 245 cm x 600 cm x 260 cm in height made of galvanized steel 3 mm thick, reinforced structure, rock wool insulation of 10 cm, and covered with waterproof polyurethane panels 5 cm thick and insulated metal door of dimensions 200 cm x 105 cm.
  • Roof sandwich panel 4 x 4 cm.
  • All arches, beams, brackets and metal parts of the structure of the enclosure are hot dip galvanized.
  • Panels sandwich side separation of 30 mm with sheet metal in its perimeter.
  • Digital Wallet available to work with up to 6 different coins embedded in the central columns of each bay wash made of stainless steel mirror.
  • Machine exchange of notes and coins made of stainless steel and integrated into the technical room.
  • Washing nozzles ceramic nozzles and lance holder in stainless steel (Mosmatic of Switzerland).
  • Crybaby gun to avoid damaging the pressure pump with stainless spear-tipped handle layered insulation of 0.90 m long with patented assisted opening. (R + M Suttner of Germany).
  • 2 Swivel Fittings for stainless steel bay (Mosmatic of Switzerland).
  • Wash arm in stainless steel 360 ° and 1.45 m in length.
  • Runway lighting washing with 4 independent lamps of 36 W each own integrated into the enclosure.
  • The night lighting of the ski wash lights automatically by the system Luxomat cells.
  • The room lighting is switched technique.
  • Posters with operating and program menu 100 cm x 100 cm each bay cleaning.
  • Side panels division high quality adhesives personalized for the customer.




  • CAT 350 pumps equipped with 13 liter / min and 945 rpm with speed and pressure gauge for more control. (Made in Japan).
  • Phase motors of 2.2 KW at 400 V per bay with anti-vibration mounts.
  • Support structure that allows easy access to work comfortably in maintenance.
  • 2 Grundfos pumps to mains water and RO water (for 4 bays include 3 pumps).
  • 3 Electro valves at the inlet of each pump of the mark Danfoss (Swedish).
  • Floats electronic deposits (2 to 4 bays of washing).
  • Water connection with filter self-bleeding.
  • Tap water filtered through stainless steel filter with 50 micron replaceable cartridge.
  • Duplex softener volumetric equipment with electronic control of 5,000 l / min. (Up to 4 bays of washing).
  • Dechlorinator to protect osmosis membrane.
  • Reverse osmosis group with active carbon filter, pump and electronic control system.
  • Water heating boiler and burner Acv with battery and running on gas or diesel of 25-45 KW (made in Belgium).
  • All electronics are integrated into a cabinet that includes touch screen Siemens that controls all functions of the center include washing and electrical protection for each motor independently and where you can quickly and easily access each item.
  • Soap powder hopper made of stainless steel shaker system e-mail float, spiral steel and the possibility to adjust the desired amount in grams of soap.
  • Program wax with independent metering pump for washing each bay (for operation with cold or hot).
  • Automatic anti freeze with the touch screen control and solenoid valves.
  • Prepared for remote operation from mobile or PC.
  • Billing and payment preferences operated from the touch screen. (With pin code protected).
  • Meter reading of the work done in a partial and total for each hint of washing.
  • On failure drawings, diagrams and explanations that serve to solve deliver 90% of failures.
  • 2 polyethylene tanks of 700 liters for osmosis and soft water. (For up to 4 bays of washing).
  • Hydraulic and electrical installation in engine room.




  • Support clamps to get the mats of the vehicles on the screens of the bays made by Mosmatic cleaning stainless steel.
  • Additional washing program with water before the wax.
  • Program additional wash with wax polished.
  • Additional wash program for cleaning wheels and tires.
  • Additional wash program with special soft washing brush.
  • Additional wash program independent foaming gun.
  • Complete installation for the connection to the underfloor heating with special regulators.
  • Magnetic key.
  • Magnetic key reader on every bay of washing.
  • Magnetic key reader to recharge in the change machine.
  • Refueling machine magnetic key to inner space (bench).
  • Additional lighting double for each job. System (luxomat).